This Tutorial was purchased 45 times & rated No rating by student like you.
A. Lab # : BSBA BIS 245A-5A
B. Lab 5A of 7 : Database design using Visio, and based on data requirements
and business rules focusing on normalizing data to third normal form.
C. Lab Overview--Scenario/Summary:
2. Given a situation containing entities, business rules, and data requirements,
create the conceptual model of the database using a database modeling tool.
You have been asked to create a database model using the MS Visio Database
Model Diagram Template. The purpose of this lab is to provide experience
normalizing the database to third normal form based on limited instructions, data
requirements, and associated business rules.
Upon completing this lab, you will be able to
1. create a new Visio file for database design; and
2. using the data requirements and the business rules provided, develop a
conceptual model (ERD), including attribute data types and required field
Section Deliverable Points
Step 1 YourName_Lab5A_ERMatrix.docx
Step 3 YourNameLab5A.vsd (Visio Diagram)
E. Lab Steps
1. Get the Lab5A_ERMatrix.docx document from Doc Sharing:
a. Download the Lab5A_ERMatrix document file from your course Doc
Sharing panel (Labs view), and Save the file to your local drive.
2. Using Citrix for MS Visio and/or MS Access
a. If you are using the Citrix remote lab, follow the login instructions
located in the iLab tab in Course Home.
3. Start MS Visio
a. Open Microsoft Office, Visio application, or
b. if you are using Citrix, click on Microsoft Office Applications folder
to start Visio. Page 2 of 5
Step 1: Identify the entities and relationships.
a. Over the past four weeks, you have created ERDs based on information
provided. This week, you will complete the ERD being sure to normalize it to
3NF (third normal form). Normalization is the systematic application of rules
designed to eliminate redundancy from the database. Data in previous weeks
was, to some extent, normalized for you. This week, it is not. An abbreviated
list of the data requirements follows.
College Scheduling Data Requirements
Student First Name
Student Last Name
Course Credit Hours
Instructor First Name
Instructor Last Name
b. Open the Word file in the Week 5 Lab Materials, Lab5A_ERMatrix.docx
c. Save the Word file as YourName_Lab5A_ERMatrix.
d. An ER Matrix helps define both the entities and the relationships between the
entities. Using the partially completed ER Matrix below as a guide, complete
Hint: You should end up with four entities.
1. List each entity both across and down.
2. Determine whether a relationship exists between entities and define that
relationship with a verb phrase. (NOTE: The entity with the greatest
number of related entities is usually the center of the ER diagram.)
3. Identify minimum (Optional or Mandatory) and maximum (only one, or one
or more).Page 3 of 5
Student none Enrolls in;
Course Is taken by:
e. Save the completed matrix to submit as part of your lab.
Step 2: Create the initial ERD based on the matrix.
a. Open a new blank Database Model Diagram in Visio. If you need assitance with
this, refer to the Week 1 Lab Instructions. Be sure that all options are set
consistent to those used in previous weeks so that you generate your model in
Crow’s Foot notation.
b. One of the issues in denormalized data is that it can result in many-to-many
relationships that are not compatible with the relational database. Visio does
not allow creation of a many-to-many relationship because of this
incompatibility. Therefore, for any many-to-many relationships in your data,
you will need to create two one-to-many relationships. See the example
below:Page 4 of 5
c. Based on the information from Step 1, create the initial ERD for the College
Scheduling database including the many-to-many relationships. If you need
assistance to create the entities, refer to labs from Weeks 1 and 2.
d. Assign the primary keys and attributes from the data requirements to the
e. Save the file as YourName_Lab5A.vsd.
Step 3: Normalize the database
a. While the initial ERD is accurate, if you design a database without deviating
from it, you will encounter problems. For example, a course is offered many
times. If you use the course code, for example BIS 245, as the primary key,
you will only be able to list the course once. There are three possible solutions.
1. Assign another primary key, such as an auto-number field, so that
the course can be listed multiple times. However, this is not
acceptable because it introduces redundancy rather than reducing it.
2. Use a composite primary key consisting of the Course Code and the
Section code. If you create a unique section code (EXAMPLE:
YearTerm_Section or 2010SpringA_A), then you can list the course
repeatedly. Again, this introduces redundancy, and is not an
3. Split the table to create two tables. TostayconsistentwithDeVry
terminology, create a second Section table. To ensure that a course is
not entered twice, you might modify the Section code to include the
course: BIS 245_2010SpringA_A. By consistently using this format,
you should not be able to duplicate the section, and can avoid a
complicated composite key. However, as the Section table will serve
as an associative entity, it is acceptable to borrow the primary keys of
b. Open the Visio file from Step 2, and add a new page. Changethepagetabto
read Revised. Revise the initial ERD based on the following information.
1. A Course may exist without being offered. It exists in the catalog.
Courses are scheduled for a term and given a section. It is the
schedule course (Section) that students enroll in, that are scheduled
in rooms and assigned instructors.
2. A Student can exist without being enrolled in a course.
3. An Instructor can exist without being assigned to teach a course.
4. A Room can exist without being scheduled for a course.
c. Save the file with your revised ERD.Page 5 of 5
Lab 5A Final Deliverables
a. YourName_Lab5A_ERMatrix.docx (Word Document) from Lab 5A Step 1
b. YourName_Lab5A.vsd (Visio Diagram) from Lab 5A Step 3.
Submit these files to the Week 5 iLabDropbox.
BIS 245 Week 7 iLabDevry University ..
A. Lab # BSBA BIS 245A-6 B. Lab 6 of 7 : Creating Reports C. Lab Overview – Scenario / Summary: TCO(s): 7. Given a database application with a completed relational schema, populated tables, and business reporting requirements, create the necessary reports and make a business decision. ..
A. Lab # : BSBA BIS 245A-5A B. Lab 5A of 7 : Database design using Visio, and based on data requirements and business rules focusing on normalizing data to third normal form. C. Lab Overview--Scenario/Summary: TCO(s): 2. Given a situation containing entities, business rules, a..
Page 1 of 5 A. Lab # : BSBA BIS 245A-4A B. Lab 4A of 7: Database design based on data requirements and business rules focusing on interpreting business rules to determine relationships. C. Lab Overview --Scenario/Summary TCO(s): 1. Given a busines..
Lab 3 of 7: Database Design Using Visio and Based on Data Requirements and Business Rules You have been asked to create a database model using MS Visio Database Model Diagram Template. The purpose of this lab is to provide experience designing, with limited instructions, a simple d..
A. Lab # : BSBA BIS 245A-2 B. Lab 2 of 7 : Skills Development in Visio; Creation of MS Access Database C. Lab Overview--Scenario / Summary: TCOs: 1. Given a business situation in which managers require information from a database, determine, analyze, and classify that information ..
A. Lab # : BSBA BIS 245A-1 B. Lab 1 of 7 : Introduction to MS Visio and MS Access C. Lab Overview--Scenario/Summary TCOs: 1. Given a business situation in which managers require information from a database, determine, analyze and classify that information so that reports can be designed..
(TCO 1) Which object would you use to enter, delete, or modify data? (TCO 1) Which object would you use to retrieve customers who live in Germany and the United States? (TCO 1) To design a report you should do all of the following EXCEPT (TCO 1) Which of the following is NOT a Report ..
Week 1 DQ 1 - Databases and Gathering Requirements Week 1 DQ 2 - Choosing a Database Week 2 DQ 1 - Entity Relationship (ER) Modeling Week 2 DQ 2 - Database Table Design Week 3 DQ 1 - Conceptual Database Design Week 3 DQ 2 - Requirements Analysis Week 4 DQ 1 - Creating Quer..
BIS 245 Week 1 Lab 1 Introduction to MS Visio and MS Access BIS 245 Week 2 Lab - Skills Development in Visio BIS 245 Week 3 Lab - Visio ERD BIS 245 Week 4 Lab - ER Diagram BIS 245 Week 5 Lab - ER Diagram and ER Matrix BIS 245 Week 6 ..
BIS 245 Week 1-7 All Discussion Questions BIS 245 Week 1 Lab 1 Introduction to MS Visio and MS Access BIS 245 Week 2 Lab - Skills Development in Visio BIS 245 Week 3 Lab - Visio ERD BIS 245 Week 4 Lab - ER Diagram BIS 245 ..